DensTop PM 605 Flow АС is a three-component, cement-polyurethane self-leveling, water-based color solution. Designed for a seamless antistatic smooth coating with excellent chemical resistance, abrasion resistance, mechanical and thermal shock.
Package
Equipment
Packing
Packaging
А+B1+В2
29.84 kg
Use directions
Industrial coatings for paint and varnish, pharmaceutical, food and other enterprises with requirements for explosion safety, which are also subject to increased requirements for chemical resistance and mechanical strength; Antistatic floor coatings exposed to thermal shock and cyclic loads when spilling hot liquids, high operating temperatures, freezing, etc .; Antistatic industrial floors with very high chemical resistance to detergents, oils, dilute solutions of alkalis and acids, hydrocarbons and other aggressive compounds.
Advantages
Surf conductive material; Wide temperature range of operation: from -15 ° C to + 70 ° C .; High mechanical strength: compressive strength, abrasion resistance, resistance to shock loads, mechanical cleaning, etc .; Excellent chemical resistance, higher than that of epoxy systems; Can be used on new concrete bases, 7 days after the device, and on slightly wet surfaces (up to 8%); Can be applied with a thickness of 4 to 6 mm, depending on the requirements of the finished coating; The seamless covering, does not form cold seams; Fast setting, commissioning after 24 hours; Environment friendly: non-toxic, solvent free and non-flammable.
